Fire Hydrant Flushing Program

The Village has over 2,500 hydrants that need to be maintained. Using GIS software, each hydrant is mapped and numbered by the Utility Division. One of the best ways to ensure hydrants are functioning properly is to flush them annually. The Utility Division has determined that all odd numbered hydrants are flushed in the fall, even numbered hydrants are flushed in the spring and all dead end hydrants are flushed during both the spring and fall flushing.

The procedure for flushing hydrants involves opening one of the three ports of the hydrant and allowing the water to flow wide open for one (1) minute. For the hydrant to operate properly, crews check for ease of opening and closing, ensures that water flow stops when the hydrant is shut down, and if any water remaining in the barrel drains down below ground level into surrounding soil. If a hydrant does not perform all of these functions, the hydrant must be repaired. Hard turning or inoperable fire hydrants can be a serious problem for the Fire Department during emergency situations and any leaks within the hydrant can be a source of water loss and a major cause for hydrant freeze up during the winter months.